Beurer Bm28 Upper Arm Bp Monitor With Adaptor

Prepare the device

•       Set the date and time: Press and hold the “SET” button (~5 seconds) if needed, then use “–/+” to select 12h/24h, then set year, month, day, hour, minute.
•      Ensure the device and cuff are at room temperature before measurement. 

Attach the cuff correctly

•         Place the cuff on the bare upper arm (left or right), not over clothing.

•         Position the lower edge approx. 2–3 cm above the bend of the elbow, with the tube pointing over the artery toward the centre of the palm.
•         Tighten the cuff so that you can still slide two fingers under the cuff, and ensure the “OK” mark (or index) lies within the correct range.
•         Plug the cuff tube into the device’s cuff connector. Use only the original cuff supplied (arm circumference 22-42 cm). 

Adopt the correct posture

•  Sit comfortably with back supported, legs uncrossed, feet flat on the floor.
• Rest quietly for about 5 minutes before measurement.
• Support the arm such that the cuff is at about heart level. Avoid talking or movement during the measurement.

Take the measurement

•        Press the START/STOP button to begin. The cuff will inflate automatically, then deflate.
•        During measurement you may see a cuff-position control icon; if the cuff is fitted too loosely/tightly the device will abort and show an error.
•        When completed, the display will show: systolic pressure, diastolic pressure, pulse; plus risk-category indicator (according to WHO) and arrhythmia warning if detected.