Beurer Ft09 Digital Thermometer

• Remove any protective film from the display.
• Press the ON/OFF button briefly. You’ll hear a short beep and the device will perform a self‑test (about 2 seconds).
• The display will show a reference temperature (normally ~37 °C) and the symbol “°C” will blink, showing the thermometer is ready.
• Place the tip of the thermometer
• Wait until the beep sounds and the “°C” symbol stops blinking. The measured temperature will then stay on display.
• For extra accuracy you may keep the thermometer in place after the beep for a little longer.
• Press the ON/OFF button again to switch off. If you forget, the thermometer will automatically shut off after about 10 minutes.
• Clean/disinfect before and after each use — the unit is 100% waterproof. Do not boil the thermometer. 

شاهد المزيد